如下為我司愛澤工業IZE_Industries本月到貨 FDC相關產品，歡迎致電索取樣本資料和產品信息。
FDC爆破片KSROH-1 FDC爆破片KSRRK-1/2
FDC爆破片KSWSRV-1/2 FDC接頭配件
FDC爆破片KSRC-8 FDC爆破片KSRO
FDC爆破片KSRRK系列介紹
設計
• 反向圓頂剪切型
• 安裝在 FDC 標準支架上
• 集圓盤和刀頭于一體
• 圓頂翻轉時，通過安裝在圓盤上的刀環進行剪切
產品特點
• 高度安全，耐腐蝕
• 適用于背壓、真空和脈動工況
• 無需真空支撐
• 工作溫度范圍廣
• 工作壓力與破裂壓力之間的差距小，圓盤使用壽命長
• 比 KSRR 更易于操作
Design
• Reverse Dome Shear Type
• It is used with installation on FDC standard holder
• It is integrated with Disc and Knife
• Shearing structure ruptured by knife ring attached to disc while dome is inverted
Product Features
• Highly safe and resistant to corrosion
• Favourable for counterpressure, vacuum and pulsation conditions
• Vacuum Support is needless
• Wide range of workable temperature
• Long life of disc as there is small gap between working pressure and rupture pressure
• Easier to handle than KSRR
FDC爆破片KSRC系列介紹
設計
• 復合材料圓頂斜座式
• 適用于安裝在 FDC 標準支架上
• 復合材料/圓頂結構，頂盤加工切口破裂
• 由頂盤、密封盤和真空盤組成
產品特點
• 適用于液體或蒸汽介質環境
• 如果密封盤材質為 Tefl，則易受高溫影響
• 適用于背壓、真空和脈動工況
• 如有需要，可提供真空支撐
• 適用于中高壓
• 耐腐蝕，具體取決于密封盤材質
• 溫度范圍受密封盤材質限制
• 精確的破裂性能和可靠性
Design
• Composite Dome Sloped Seat Type
• It is used with installation on FDC standard holder
• Composite/Dome structure ruptured by slit processed on Top disc
• It consists of Top disc, Seal disc and Vacuum disc
Product Features
• Suitable for liquid or steam media environments
• Vulnerability to high temperature in case that material of Seal disc is Tefl on
• Favorable for counterpressure, vacuum and pulsation conditions
• If any, Vacuum Support is available
• It is applied to medium/high pressure
• Resistant to corrosion according to Seal Disc materials
• Limited temperature range by Seal Disc material
• Precise rupture performance and excellent reliability
FDC爆破片KSRO系列介紹
設計
• 法蘭復合扁平型
• 無需支架即可安裝在法蘭上
• 復合/扁平結構，頂盤加工切口破裂
• 由頂盤、密封盤和真空盤組成
KSROH
• 復合扁平型
• 與 KSRO 相同，但用于安裝在 FDC 標準支架上
產品特點
• 適用于液體或蒸汽介質環境
• 如果密封盤材質為 Tefl，則易受高溫影響
• 易受脈動影響
• 如有脈動，可提供真空支撐
• 主要應用于低壓環境
• 耐腐蝕性能取決于密封盤材質
• 溫度范圍受密封盤材質限制
• 精確的破裂性能和可靠性
Design
• Composite Flat Type for Flange
• Used with installation on Flange without holder
• Composite/Flat structure ruptured by slit processed on Top disc
• It consists of Top disc, Seal disc and Vacuum disc
KSROH
• Composite Flat Type
• Same as KSRO, but used with installation on FDC standard holder
Product Features
• Suitable for liquid or steam media environments
• Vulnerability to high temperature in case that material of Seal disc is Tefl on
• Vulnerability to pulsation conditions
• If any, Vacuum Support is available
• It is applied to low pressure mainly
• Resistant to corrosion according to Seal Disc materials
• Limited temperature range by Seal Disc material
• Precise rupture performance and excellent reliability
FDC爆破片KSRSF系列介紹
設計
• 前向圓頂刻劃型
• 適用于安裝在 FDC 標準支架上
• 刻劃結構，刻劃損傷經過精確拉伸破裂
產品特點
• 主要應用于高壓環境
• 安全性高，耐腐蝕
• 適用于背壓、真空和脈動工況
• 無需真空支撐
• 工作溫度范圍廣
• 工作壓力與破裂壓力之間的差距小，閥瓣壽命長
Design
• Forward Dome Scored Type
• It is used with installation on FDC standard holder
• Carved structure with Scored Damage processed precisely ruptured by tension
Product Features
• It is applied to high pressure mainly
• Highly safe and resistant to corrosion
• Favourable for counterpressure, vacuum and pulsation conditions
• Vacuum Support is needless
• Wide range of workable temperature
• Long life of disc as there is small gap between working pressure and rupture pressure
FDC爆破片常用型號：
FDC KSROF
FDC KSROH
FDC KSRRK-1
FDC KSRBK
FDC KSRBKH
FDC KSRC-8
FDC KSRO
FDC KSRO-10
FDC KSRO-2
FDC KSRO-24
FDC KSRO-3
FDC KSRO-8
FDC KSRO-8 EA
FDC KSROFD
FDC KSROH 1"
FDC KSROHD
FDC KSROL
FDC KSRR
FDC KSRRC
FDC KSRRCF
FDC KSRRCFD
FDC KSRRCH
FDC KSRRK 1/2"
FDC KSRRK-1 1/2
FDC KSRRK-1 1/4
FDC KSRRK-10
FDC KSRRK-12
FDC KSRRK-14
FDC KSRRK-16
FDC KSRRK-2
FDC KSRRK-2 1/2
FDC KSRRK-3
FDC KSRRK-4
FDC KSRRK-5
FDC KSRRK-6
FDC KSRRK-8
FDC KSRRKF
FDC KSRRKP-1
FDC KSRRKP-1/2
FDC KSRRKP-3/4
FDC KSRRL
FDC KSRRLD
FDC KSRSF
FDC KSRSR
FDC KSRST
FDC KSWSRV 1/2
FDC KSWSRV 1/2T
FDC KSWSRV-1/2
FDC RTD-3000 3/4
FDC KSRO-32
FDC KSRRK-1/2
FDC KSRRK-3/4
如果您需要完整的FDC的相關技術咨詢，請隨時致電愛澤工業，或者訪問網站，我們將盡全力解決您的問題。
If you have any question for FDC，Please feel free to communicate with us and we will do our best to solve your problem.
